How to scan for Satellite channels in Ghana

Scanning for satellite channels in Ghana is an exciting experience. With the vast array of channels available, there is something for everyone. From news, sports, and entertainment, to music, comedy, and educational programs, Ghana has it all.

Before you start scanning for satellite channels in Ghana, you need to make sure that your satellite dish is properly installed and pointed in the right direction. Once you’ve done that, the next step is to select the right satellite receiver and connect it to your satellite dish.

In this article, we will be talking about how to scan MultiTV satellite decoders for channels.

What is MultiTV

Multi TV is a countrywide free-to-air television based in Ghana. Operating more than 20 television and radio channels. Mutli TV offers a variety of entertainment, news and sports channels in digital format. Multi TV also provides the live streaming of news, events and videos from all the leading TV channel providers in Ghana.

How to install Multi TV satellite decoder

The Multi TV satellite direction is positioned towards the east. That is where its signal comes from. So during installation, You must ensure your satellite dish is facing the east. For your Multi TV satellite installation, you can choose to follow the installation manual to install or contact an installation expert to help you out.

  1. The dish comes with a round plate, a dish cap, a stand, an LNB and an LNB holder, dish accessories.
  2. Assemble the dish, then carefully fix the LNB in its holder at the last end of the angle bar.
  3. Mount the stand with the four holes at the rear end on a wall where you deem fit. The stand has eight holes all together. When fixing the stand, be careful not to bend or turn the stand at the wrong position.
  4. Hold the stand firmly with your hands as if mounting the dish, then see if the dish is well fixed in a way that it can track signal while facing the east direction. If everything is okay, mount the stand on the wall.
  5. Use normal nails on a facial board and use concrete nails for a wall.
  6. Mount the dish in a place where there are no objects blocking the signal (e.g. tall buildings, planted trees, human object, thick electric cables etc).
  7. After mounting the dish, tighten it partially to allow for adjusting and turning. This is because you may have to turn the dish vertically and horizontally until the signal shoots or flashes.
  8. Connect the coaxial cable from your dish to the receiver using the connecters.
  9. Connect it into the receiver’s LNB input.
  10. Switch on the receiver.

NB: To make sure you’re getting the best reception possible, you should adjust the position of your satellite dish to maximize its reception of the satellite channels in Ghana. This is especially important if you’re in an area where the signal is weak.

How to scan for satellite channels in Ghana

The following is the Multi TV satellite channels scanning guide for each decoder.

Syndicated decoder

  1. Press MENU.
  2. On INSTALLATION press OK.
  3. Select MANUAL SEARCH and press OK.
  4. Press the green button on the remote to edit the frequency.
  5. Select MODIFY.
  6. Press OK.
  7. Input 12522
  8. Press OK.
  9. Select POLARIZATION.
  10. Press the RIGHT button on the OK to change to vertical.
  11. Press OK.
  12. Then select SYMBOL RATE 27000
  13. Press on the BLUE BUTTON to save and exit OK to start Scanning
  14. Move channel down knob to start search.
  15. Press OK to start scanning.
  16. Press exit.

Strong box decoder

  1. Press MENU.
  2. Press on the RIGHT volume button.
  3. Input 0000 as password.
  4. Select MANUAL SCAN and press OK.
  5. Press RED BUTTON on the remote to select transponder ASTRA 3A/3B.
  6. Press GREEN BUTTON to add TP list.
  7. Input frequency 12522
  8. Go to symbol rate and input 27000.
  9. Change the polarization to either V or H to make the bars change to green color.
  10. Press OK to scan.
  11. Exit.

Somotex ash decoder

  1. Press MENU.
  2. Select INSTALLATION.
  3. Press the red button to EDIT.
  4. Input 12522 on the FREQUENCY.
  5. Press OK.
  6. Input 27000 on the SYMBOL RATE.
  7. Select POLARITY and press RIGHT button to select either Vertical or Horizontal.
  8. Select SAVE and press OK.
  9. Press on the BLUE button and OK to scan.
  10. Press OK on YES.
  11. Press EXIT to begin viewing channels.

Quality decoder

  1. Press MENU.
  2. Scroll down to DVB-S, Click OK.
  3. Input 0000 and press OK.
  4. Select DISH SETTINGS.
  5. Click the YELLOW BUTTON on the remote to edit TP.
  6. Scroll down to SYMBOL RATE and key in 27000.
  7. Scroll to YES and click OK.
  8. Scroll to SERVICE SEARCH, click OK.
  9. Scroll to START SCAN and click OK.

Final words

Scanning for satellite channels in Ghana is an exciting way to explore the different kinds of programming available in the country. With a little bit of effort, you can get access to a wide array of channels and programs that you can enjoy any time you want.


Thank you for reading on Asetena.com Share this article with your family and friends.

Follow us on Facebook, Twitter and Instagram for more updates.

Email: [email protected]

Leave a comment